Product Description
Unifab TAR EXTRA CT
CONCENTRATED OIL,GREASE, PIT AND TAR REMOVER
SPECIAL FORMULA: Due to its special formula, it creates a consistency that thickens when mixed with water.
SURFACE STICKING: Due to its thick consistency, it does not leave the surface it adheres to until the oil/grease/tar is removed.
NON-EXPLOSIVE, NON-FLAMMABLE: Safe, acid and alkali free. Unlike other highly flammable solvents, it does not glow.
NO SMOKE: When mixed with water, it does not form toxic and irritating solvent fumes.
ECONOMICAL: Does not run or drip due to its consistency that adheres to the surface. Therefore, the waste of the product does not occur.
EFFICIENT USE ON VERTICAL SURFACES: Other types of solvent-based cleaners evaporate on vertical surfaces before results are obtained, leaving the cleaning process incomplete. With our TAR EXTRA CT product, this risk does not exist.
REDUCES WORK FORCE: No force is required when cleaning. It is enough to spray the surface.
INSTRUCTIONS FOR USE
- Dilute one unit of TAR EXTRA CT with 4 units of water.
- Dilution must be done by shaking.
- Spray with a spray bottle or apply to the surface with a cloth or brush.
- Wait for 5-10 minutes.
- Then rinse with high pressure water.
PRECAUTIONS
- In case of contact with eyes, rinse with plenty of water.
- It is recommended to use the product with protective gloves, as it may dry out the skin due to the absorption of natural oils.
FOR INDUSTRIAL USE ONLY
Similar Products
