Product Description
A SINGLE USE OF A METAL SURFACE CLEANER FROM RUST AND DIRTY IS ENOUGH TO PREPARE THE SURFACE FOR PAINTING.
USER MANUAL
Depending on the condition of the grease and oil, dilute one unit of PREP PAINT with 5-20 parts of water. Apply the prepared solution with a brush or cloth. Wait for rust and corrosion to dissolve. Rinse with clean water and allow to dry. After drying, apply protective agent immediately.
APPLY BY AN IMMERSION METHOD:
The container in which you will prepare the solution should be fiberglass or plastic. Вэдгеу the PREP PAINT as above and leave the required material in the solution until it is cleaned. After rinsing the cleaned material with water and drying, apply a protective agent immediately.
ISSUES TO CONSIDER:
It is not recommended to apply PREP PAINT to chrome, galvanized or nickel-plated metals or parts that may contain these metals.
Product may decompose or thicken when stored in cold or freezing conditions. This does not affect the performance of the product. Leave the product at room temperature for a while before use. Be sure to read the user manual. Rinse hands with plenty of water after use.
In case of contact with eyes, rinse with plenty of water. Do not use to clean hands, face, body or food. Use protective gloves. Keep out of the reach of children.
PACKAGE:
30 KG. POLYETHYLENE CAN
Similar Products
