OTOMAT B

Unifab OTOMAT-B

Alcohol Based Automate Product

SPECIFICATIONS

• This is a concentrated, high alkaline industrial cleaner with foam control for use with scrubbing robots to clean heavily soiled and greasy hard surfaces.
• This is an all-purpose, highly concentrated, heavy-duty cleaner that can be applied to all types of washable floors to remove dirt.
• Agent for floor-drying machines is used for cleaning all washable and wipeable surfaces in various premises (hospitals, hotels, schools, industrial kitchens, production facilities, etc.).
• Adds gloss to a floor. Doesn't scratch or fade.
• The inhibitors contained in the product prevent the blackening of stainless steel equipment.
• The product is suitable for environmental hygiene. In nature, it decomposes by more than 80%.
• Foam is controlled by a special foam knife.
• Sensitive surfaces; It can be safely used on polished and matte granite, epoxy and PVC floors.
• Removes oil, dirt and other stains from all surfaces without being exposed to water and makes the environment hygienic.

APPLICATION INFORMATION

• The agent can be diluted up to 1/20 - 1/40 depending on the capacity of the chamber of the automatic machine.
• The mixture is rubbed with a red sponge attached to the cleaning robot on dirty surfaces and with a white sponge on lightly soiled surfaces and rinsed with water under pressure. Dirty water that comes out is drawn out with a vacuum dryer. In cases where a cleaning robot is not available, it is applied to the surface using a wet mop with a floor cart with a two-bucket press.
• The product is specially developed for automatic machines, its foam is controlled.
• It is applied directly with a sprayer according to the oil consumption on the surface, or diluted at a ratio 1/10 - 1/15 and aged for some time, after which it is rubbed with a felt sponge and washed off with water.

CHEMICAL STRUCTURE

• Alkalis, nonionic active substances, organic solvents, complexing agents, solvent, inhibitor, preservative, antifoam, water.

PHYSICAL CHARACTERISTICS

• Appearance: slightly turbid yellow liquid.
• PH (1% solution): 14

STORAGE CONDITIONS

• Store in a cool place.
• Do not stack more than two drums on top of each other.

WARNINGS

• Avoid contact with skin and eyes.
• In case of contact with skin and eyes, rinse with plenty of water.
• Use protective gloves.